History of Austin Healey

Alan and Richard Jensen produced their first car in 1928 when they converted a five year old Austin 7 Chummy Saloon into a very stylish two seater with cycle guards, louvred bonnet and boat-tail. This was soon sold and replaced with another Austin 7.

Then came a car produced on a Standard chassis followed by a series of specials based on the Wolseley Hornet, a popular sporting small car of the time. The early 1930s saw the brothers becoming joint managing directors of commercial coachbuilders W J Smith & Sons and within three years the name of the company was changed to Jensen Motors Limited. Soon bodywork conversions followed on readily available chassis from Morris, Singer, Standard and Wolseley.

You are more then welcome to contact me and ask me any questions whether you would like to buy, sell or  trade your vehicle/collectable in.

Jensen’s work did not go unnoticed as they received a commission from actor Clark Gable to produced a car on a US Ford V8 chassis. This stylish car led to an arrangement with Edsel Ford for the production of a range of sports cars using a Jensen designed chassis and powered by Ford V8 engines equipped with three speed Ford transmissions. Next came a series of sporting cars powered by the twin-ignition straight eight Nash engine or the Lincoln V12 unit. On the commercial side of the business Jensen’s were the leaders in the field of high-strength light alloys in commercial vehicles and besides buses also produced a range of alloy bodied trucks powered by either Ford V8s, fours or Perkins diesels.

World War Two saw sports car production put aside with attentions turned to more appropriate activities such as revolving tank gun turrets, explosives and converting the Sherman Tank for amphibious use in the D-Day invasion of Europe.

Post-War and Austin

August 1946 saw Jensen launch their entirely new ‘PW’ model powered by a Meadows straight eight of 3,860cc and was shown with some success in the London Motor Show of the same year. Unfortunately the Meadows engine suffered from excessive vibration and Jensen had to fall back on a stock pile of pre-war Nash engines. Not long after Richard Jensen saw what looked like another ‘PW’ on the streets of London, however it turned out to be a new four litre Austin Sheerline. What happen was that Leonard Lord of Austin (soon to feature largely in the decision to produce the Austin-Healey) had also seen the ‘PW’ at the show and set into production the similar looking Sheerline. A meeting was held between Lord and the somewhat aggrieved Richard Jensen. In an effort to placate Jensen, Lord offered the use of the Austin four litre six cylinder. Jensen really couldn’t refuse, as the ‘PW’ was a car looking for an engine. This arrangement was to lead to an association between the companies that was to last for over twenty years.

The Austin 4 litre is of interest to Austin-Healey owners. Its capacity is 3,993cc from a bore and stroke of 87.3mm by 111.1mm and if that sounds familiar, it is also the dimensions as the Austin-Healey 100 engine. What that means of course is that the engine is the six cylinder version of the four.

With the availability of an engine assured, the Jensen brothers once again turned their minds towards the production of another sporting car. Designer Eric Neale suggested using a propriety chassis, so a further approach was made to Leonard Lord for Austin to supply their A70 chassis. Lord readily agreed with the proviso that Jensen also produce a special sports body for the Austin A40. The resulting two vehicles ended up looking quite similar in style. The name Interceptor was chosen for the Jensen model, a name that was to be used again some years later. The smaller vehicle was titled the Austin A40 Sports and some 3,200 were produced with 643 exported to the US.

The production of the A40 Sports provided Jensen’s with a steady stream of income allowing the company to design and produce their own vehicles such as the Interceptor. It also allowed the company to bid for other projects such as the production of the new Austin-Healey 100. In the April/May 1998 issue of the Austin-Healey Magazine I told the story how at the 1952 London Motor Show at Earl’s Court, Leonard Lord did not quite come across the new Healey 100 by accident. Lord had set up an unofficial competition between Jensen, Healey and Fraser-Nash. The Jensen vehicle was a very pretty two door open sports car that had been commissioned by Lord to be built on the A40 chassis. Unfortunately the Jensen wasn’t finished in time for the Motor Show so it wasn’t available for Lord to see.

You would have thought that the deal between Leonard Lord and Donald Healey would have meant that Austin would manufacture the new Austin-Healey 100. No, not quite as Austin, like the DHMC did not have the capacity to produce the car from scratch in the volume desired. However DMH had close contact with Tickford (now owned by Ford) and preliminary discussions had revealed that production of around 40 cars per week could be achieved. On hearing of the new Austin-Healey a meeting was also arranged between Lord and Richard Jensen, where Lord was advised that Jensen could produce 150 cars per week. Lord was interested but wanted to see the Jensen prototype A40 based sports car as an example of their work. History tells us that Lord was impressed with the vehicle and the contract to build the bodies of the New Austin-Healey was awarded to the Jensen Motor Company. From that point all subsequent styling and body engineering on the big Healey including competition vehicles was undertaken by Jensen in conjunction with the DHMC.

Again with a steady stream of income assured, Jensen could develop an all new GT car as a successor to the Interceptor. This vehicle turned out to be the Jensen 541, so named as it was released for sale in 1954. A Jensen designed chassis was used for the 541 but still with the Austin drivetrain and A70 suspension. In my opinion the 541 was the most attractive coupes of the 1950s and I suspect that it was also a favourite of DMH as he took delivery of one example but without an engine. A small block Chevrolet V8 was fitted at the DHMC and it became a very fast and safe transport for him. Safe? Yes the 541 was the first British production saloon car to be fitted with four wheel disc brakes.While Jensen continued to construct the Austin-Healey they drifted away from using Austin components for their own vehicles. The next Jensen launched was in 1962 and titled the CV8, which as the name implies was powered by a V8 engine supplied by Chrysler complete with their excellent Torqueflite automatic transmission. The same powertrain was also fitted to the Italian styled Jensen Interceptor range introduced in 1966 and stayed in production until 1975.

Other Contract and Projects

The Jensen Motor Company was not immune to the world of corporate takeovers and suffered that fate at the hands of the Norcross Group in the late 1950s. A step that would eventually lead to the premature retirement of Alan and Richard Jensen. However this was not before Jensen’s won a contract to assemble, paint and finish the new Volvo P1800 coupe on bodies produced by Pressed Steel in Scotland. The completed bodies were then shipped to Sweden for the addition of mechanicals. The arrangement wasn’t wholly satisfying as the Pressed Steel shells weren’t to a high standard plus the cars were arriving in Sweden with a fair amount of damage. Some 130 bodies were being completed per week until Volvo paid out the contract and commenced to finish the vehicles themselves.

Also for 5 ½ years during the 1960s Jensen built 7,067 Sunbeam Tigers for the Roots Group until such a time when Roots was taken over by Chrysler, who couldn’t countenance a Ford V8 in one of their cars.

While they weren’t the first, Jensen also during the late 1960s and 70s produced the highly successful Jensen FF models. The letters stood for Ferguson Formula and was in essence four wheel drive through a transfer case. The same cars were also fitted with the Dunlop Maxaret breaking system which prevented brake lock-up by the use of mechanical sensors. Yes it was all many years before today’s 4WD sedans and ABS breaking.

However it was the Austin-Healey contract that was the main source of income for the Jensen Motor Company. It was also common knowledge in 1965 that Donald Healey was at loggerheads with George Harriman of BMC over the DHMC financial cut from big Healey manufacturing. It was Harriman’s intention to wind up Healey production and replace it with a badge-engineered MG model. (This turned out to be the MGC which was also to be sold as the Austin-Healey 3000 Mk IV) As a result of all this the Jensen brothers decided to build a new model to replace the Austin-Healey in the US market. Two prototypes were built and called the P66. One car was tested by Autocar magazine who found that it was powered a 4.5 litre Chrysler V8 making it good for 140 mph. This new car was destined for the US market, and was undoubtedly British plus it had the familiarity of the home-grown V8. Unfortunately the P66 caused insurmountable ructions within the company and the Norcross Group. The Jensen Brothers saw the car as the natural successor to the Austin-Healey 3000 which the other side wanted a replacement for the CV8. The P66 was priced at 2,200 Pounds in the UK against 3,500 Pounds for the CV8. Understandably the Norcross Group won as they controlled the purse strings and the P66 project was abandoned for the well known Jensen Interceptor. Within weeks Eric Neale, the chief designer had resigned and both Alan and Richard Jensen retired. Jensen was no longer a family company.

The Jensen-Healey

The late 1960s saw the Jensen Motor Company in a dire financial situation as the Austin-Healey contract had come to an end and there were build problems with the Interceptor. Norcross sold the company to merchant bankers William Brandt. Sons & Company Ltd. And through careful management Interceptor production increased in an effort to improve sales and then decreased to improve construction standards. Jensen was a company going nowhere. However all was not lost as DMH once again entered the scene as he had been discussing the production of a new sports car with Mr Kjell Qvale, a San Franciscan businessman. Qvale operated a very successful business selling Jaguar, Rolls-Royce and BMC vehicles. He too was dismayed at the discontinuing of the Austin-Healey 3000 and like a lot of us many years later, was surprised at the role played by Jensen in the construction of the big Healey, and yes he was interested in the ideas of DMH for a new sports car. Before long Qvale became Jensen’s majority shareholder and assumed full control of the company with DMH as Chairman and Geoff Healey one of the company directors. Additionally with DMH as Chairman of Jensen meant that the DHMC lost their valuable British Leyland Motor Corporation franchise and US Forces concession as well. The DHMC quickly negotiated a franchise with Fiat.

The story of the Jensen-Healey is one of building a car that was almost right, but problems with build quality and engine reliability were to thwart it from the beginning. First a Vauxhall engine and then one from BMW were considered before an untried and undeveloped Lotus unit was used. Sure it satisfied the all important US emission regulations and as it was designed to be fitted at an angle of 45 degrees it was not unduly tall but Qvale was insistent on early delivery, way before it was ready. The vehicle made its debut at the Geneva Motor Show in March 1972 with initial press approval. It wasn’t long before the faults of the car rose to the surface and to be fair to Lotus, Colin Chapman did warn Qvale that the engine was underdeveloped. In the end it was the customers who developed the engine and car by their own use and rectification cost Jensen more money then it could afford.

The Mk2 when released in August 1973 was a vastly improved car and was improved again with the use of the German Getrag five-speed gearbox in November 1974. However DMH became disgruntled with the whole arrangement and left the Jensen Board in 1974 and refused to have his name associated with the fixed-head, hatch-back GT version introduced in July 1975.

The connection with Austin had long been severed and so had that with DMH. Jensen lurched from crisis to crisis and the "energy crisis" of 1974 brought on by the Yom Kippur War resulted in the company being at the brink of collapse. A plea to the left wing British Government of the time fell on deaf ears and Jensen Motors Ltd ceased trading in May 1976. Qvale purchased the Jensen assets from the Receiver and went on to form a company that serviced and renovated Jensen vehicles, but derived its main income from the importing and distribution of Subaru and Hyundai cars.

For the sake of the record there have been attempts to recreate the Jensen Interceptor and the special place held by the cars of the marque. However each have met with varying degrees of success and as there has been no Austin or Healey involvement it is as they say, another story.

Back